Best UV Light For 3d Printing

Share your love

If you are looking for Best UV Light For 3d Printing and look for these on Reddit and have not found the best UV light, then you are at the right place. After checking many UV lights and different reviews of the items, we bring a Top 10 list(Unbiased) of Best UV Light For 3d Printing which is bestselling and most suitable for your 3d printer.


Introduction: What is UV Light & How does it Affect a 3D Printer?

UV light is a form of light that is invisible to the human eye. It has higher energy than visible light and can cause damage to your skin. UV lights are used in many industries, but they are especially popular in 3D printing because they cure the polymers that make up the 3D print.

UV light is a form of electromagnetic radiation with wavelengths from 10 nanometers to 400 nanometers, which are longer than those of visible light but shorter than X-rays. UVA rays penetrate more deeply into organic tissue than visible light, which makes it dangerous for your skin and eyes.

UV lights are also used in many other industries including semiconductor fabrication and water purification systems. They have an advantage over traditional fluorescent lamps for this purpose because they emit mostly in the ultraviolet range, which is what is required to trigger the fluorescence of their targeted microorganisms. There are only a few fluorescent bulbs that have been approved for use inside home aquariums.

Let’s check our Unbiased list of the Best UV Light For 3d Printing.

1. Comgrow 3D Printer UV Resin Curing Light(Best UV Light For 3d Printing)

Best UV Light For 3d Printing

The UV LED lamp employs six high-power 405nm UV LEDs to quickly cure 405nm UV resin prints, allowing objects to be cured in less time than usual. NOTE: It cannot directly cure liquid resin and cannot cure filament prints.


The 360° rotating solar turntable is powered by UV lighting/nature solar power/fluorescent lighting and cannot be powered by batteries.
Maximum display/rotate weight of less than 500g/1.1pound, which is also the recommended size for which the light can cure. TIPS: Being close to a light source will help you speed up and rotate heavier.


From a distance of 5 cm from the light, the resin can be cured in 10-15 seconds. NOTICE: thicker parts take longer to cure. Furthermore, the UV light’s dimensions are 3.354.533.74″, and the turntable’s diameter is 3.5″.

Please use eye protection when using this light due to the intense ultraviolet light output.

UV and resin curing are two applications (SLA DLP print curing). The lamp is suitable for use in DIY curing packages and handheld applications.

Comgrow 3D Printer UV Light

2. GIANTARM 3D Printer UV Resin Curing Light

Best UV Light For 3d Printing

A cold light source will not harm the object’s surface. Because UV light is not visible, you should avoid prolonged exposure, especially when looking directly at it.

QUICK RESULTS-The LED lamp should be as close to the surface of the prints as possible; keep 1-5cm away from the surface to cure in 10-15 seconds. Please use eye protection when using this light due to the intense ultraviolet light output.

Energy-saving design: The LED lamp uses 6pcs high-power 405nm LEDs, with power consumption that is one-tenth that of traditional UV lamps, and it does not contain mercury. Efficient, energy efficient, and environmentally friendly.

MUCH BRIGHTER– LED UV lamp 6W is equivalent to 60W brightness, and its power consumption is one-tenth that of a traditional UV lamp.

GIANTARM 3D Printer UV Light

3. Sovol 3D Printer UV Resin Curing Light

Best UV Light For 3d Printing

The UV LED lamp employs six high-power 405nm UV LEDs to quickly cure 405nm UV resin prints, allowing objects to be cured in less time than usual. The resin can cure in 10-15 seconds when held 5 cm away from the light, but thicker parts take longer.
Newly designed curing bracket that is more robust than previous models. It is simple to install with a screwdriver and to adjust its own height for different print sizes. Keep your hands free and your resin curing in top shape. Maximum Curing Dimensions: 140160mm/5.56.3in. Please contact us if you do not receive the protective rubber feet; we will send them to you.


The 360° rotating solar turntable is powered by UV lighting/nature solar power/fluorescent lighting and cannot be powered by batteries. Maximum display/rotate weight of 500g/1.1pound. Close proximity to light will assist in speeding up and rotating heavier.
The rubber support pads in this kit help stabilise the curing process. The same function but is less expensive than a curing box.
UV curing for 3D printers, resin curing (SLA DLP print curing). Please use eye protection when using this light due to the high light output.

Sovol 3D Printer UV Light

4. Tresbro UV Resin Curing Light(2nd Best UV Light For 3d Printing)

Best UV Light For 3d Printing

Chesbro 3D printer UV resin curing light with UL-certified waterproof power supply is safer to use than other cheap UV resin light. The high brightness chip and led beads effectively reduce light decay. The aluminium casings ensure no rusting and long-term use.

The 6W UV resin curing light uses 6 high-power 405nm UV Led beads to cure your UV resin prints quickly and efficiently. This 6W UV light has a 60W output effect, and its power consumption is one-tenth that of a traditional UV lamp. It does not contain any mercury. Efficient, low-energy consumption, and environmentally friendly.

360°Rotating Solar Power Turntable IncludedThe Tresbro UV resin curing light includes a 360° rotating solar power turntable. With this turntable, you’ll never have to worry about uneven curing of your favourite prints again. Furthermore, the solar turntable can be used with either batteries or a UV light, which is highly convenient.

Fast curing within 5 cm of the light, the resin can cure in 10-15 seconds; however, thicker parts require more time. This UV resin curing lamp will significantly reduce your curing time.

Reminder: The UV light for resin can be used in a DIY curing enclosure or as a handheld device. Please use eye protection when using this light due to the high UV light output.

Tresbro UV Resin Curing Light

5. Aystkniet Resin Curing Light

Best UV Light For 3d Printing

Our 3D printer light with the UL-certified waterproof power supply is safer and more reliable than other UV curing lights. The high brightness chip and LED beads reduce light decay, and the aluminium casings do not rust, ensuring long-term use.
UV curing lamps with 6 high-power 405nm UV LEDs can efficiently cure resin prints. The power consumption is one-tenth that of a regular resin UV light; there is no mercury, and it is environmentally friendly.


It has a 360° solar display that can evenly cure 3D prints. UV lighting can drive turntable rotation, which is very useful during curing. The maximum display/rotate weight should be less than 1.1lbs/500g. 3.6 in diameter “/ 9cm.
Within 1.9 seconds, the resin can be cured “/ 5cm to the light, but thicker parts take longer. Close proximity to light will aid in speed. Stopping with the hand reverses the rotation direction.
The UV light for resin can be used in a DIY curing enclosure station or as a handheld device. Please wear eye protection due to the high UV light output when using this light.

Aystkniet Resin Curing Light

Why You Should Use There are many benefits And Uses For UV Light With Your 3D Printer:

In conclusion, UV light is a very important component of 3D printing. It is used for the following purposes:

– To dry the print and make it more durable.

– To provide a smoother surface finish.

– To provide a surface finish that is more like injection molded plastic.

– To remove support structures from the print, for example in cases where the supports are not easily removed by hand.

Check Also; If you looking for these best items on Reddit.

  1. Best Mattress Reddit.
  2. Best Wireless Gaming Mouse Reddit.


Share your love

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.